AGS500 - STANDARD ISO 11901-3 - Bordignon

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13

		LINA Bill of material	MODELLO Model ⁿ/ₐ	CORSAMAX Max. stroke [mm]	LMIN Chamber height [mm]	L Total height [mm]	A Overstroke protection [mm]	D Chamber diameter [mm]	DS Piston rod diameter [mm]	G [mm]	R Gap range [mm]	Z Gap height [mm]	MA Fastening threads [/]	BAR / ⁿ/ₐ	IN Initial force [daN]	FIN Final force [daN]	CICLIMIN Max. cycles per minute [/]	VOLUMEGAS Liters [Litri]	PESO [kg]	INFO ⁿ/ₐ

		AGS500-10-A	AGS500-10-A	10	40	50	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	720	300	0.009	0.26	Internal geometry does no...
		AGS500-13-A	AGS500-13-A	13	43	56	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	720	230	0.012	0.28	Internal geometry does no...
		AGS500-16-A	AGS500-16-A	16	46	62	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	730	190	0.014	0.29	Internal geometry does no...
		AGS500-19-A	AGS500-19-A	19	49	68	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	730	160	0.017	0.3	Internal geometry does no...
		AGS500-25-A	AGS500-25-A	25	55	80	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	740	120	0.023	0.32	Internal geometry does no...
		AGS500-32-A	AGS500-32-A	32	62	94	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	740	90	0.029	0.35	Internal geometry does no...
		AGS500-38-A	AGS500-38-A	38	68	106	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	740	80	0.035	0.38	Internal geometry does no...
		AGS500-50-A	AGS500-50-A	50	80	130	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	750	60	0.046	0.43	Internal geometry does no...
		AGS500-63-A	AGS500-63-A	63	93	156	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	750	50	0.059	0.48	Internal geometry does no...
		AGS500-75-A	AGS500-75-A	75	105	180	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	750	40	0.07	0.52	Internal geometry does no...
		AGS500-80-A	AGS500-80-A	80	110	190	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	750	40	0.075	0.55	Internal geometry does no...
		AGS500-100-A	AGS500-100-A	100	130	230	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	750	30	0.094	0.63	Internal geometry does no...
		AGS500-125-A	AGS500-125-A	125	155	280	2	38	20	12.5	1	4	M6 x 6 (2x o 2x)	150	470	760	25	0.117	0.73	Internal geometry does no...

Additional Information

Users who viewed this, were also interested in

AGS2400 - STANDARD ISO 11901-3

AGS2400 - STANDARD ISO 11901-3Bordignon 13.03.2023

AGS1000 - STANDARD ISO 11901-3

AGS1000 - STANDARD ISO 11901-3Bordignon 13.03.2023

AGS750 - STANDARD ISO 11901-3

AGS750 - STANDARD ISO 11901-3Bordignon 13.03.2023

VGS200... - STANDARD ISO 11901-1

VGS200... - STANDARD ISO 11901-1Bordignon 01.12.2023

AGS320 - STANDARD ISO 11901-3

AGS320 - STANDARD ISO 11901-3Bordignon 13.03.2023

AGS1500 - STANDARD ISO 11901-3

AGS1500 - STANDARD ISO 11901-3Bordignon 13.03.2023

AGS4200 - STANDARD ISO 11901-3

AGS4200 - STANDARD ISO 11901-3Bordignon 13.03.2023

VGS50... - STANDARD ISO 11901-1

VGS50... - STANDARD ISO 11901-1Bordignon 01.12.2023

VGS70... - STANDARD ISO 11901-1

VGS70... - STANDARD ISO 11901-1Bordignon 01.12.2023

TGS3000... - COMPACT SERIES

TGS3000... - COMPACT SERIESBordignon 29.11.2023

TGS2000... - COMPACT SERIES

TGS2000... - COMPACT SERIESBordignon 29.11.2023

Special Springs

RV 500 - Minimum height, maximum force

RV 500 - Minimum height, maximum forceSpecial Springs 09.04.2024

EGS16X1,5-... - NITROGEN GAS EJECTORS

EGS16X1,5-... - NITROGEN GAS EJECTORSBordignon 29.11.2023

BRE scrap remover - Height 27 mm, load max. 50 Kg, minimum air consumption, easy to use

BRE scrap remover - Height 27 mm, load max. 50 Kg, minimum air consumption,...Bordignon 04.01.2023