AGS750 - STANDARD ISO 11901-3 - Bordignon

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13

		LINA Bill of material	MODELLO Model ⁿ/ₐ	CORSAMAX Max. stroke [mm]	LMIN Chamber height [mm]	L Total height [mm]	A Overstroke protection [mm]	D Chamber diameter [mm]	DS Piston rod diameter [mm]	G [mm]	R Gap range [mm]	Z Gap height [mm]	MA Fastening threads [/]	BAR / ⁿ/ₐ	IN Initial force [daN]	FIN Final force [daN]	CICLIMIN Max. cycles per minute [/]	VOLUMEGAS Liters [Litri]	PESO [kg]	INFO ⁿ/ₐ

		AGS750-10-A	AGS750-10-A	10	42	52	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1200	300	0.013	0.40	Internal geometry does no...
		AGS750-13-A	AGS750-13-A	13	45	58	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1230	230	0.017	0.42	Internal geometry does no...
		AGS750-16-A	AGS750-16-A	16	48	64	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1230	190	0.021	0.44	Internal geometry does no...
		AGS750-19-A	AGS750-19-A	19	51	70	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1250	160	0.025	0.45	Internal geometry does no...
		AGS750-25-A	AGS750-25-A	25	57	82	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1250	120	0.033	0.49	Internal geometry does no...
		AGS750-32-A	AGS750-32-A	32	64	96	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1250	90	0.042	0.53	Internal geometry does no...
		AGS750-38-A	AGS750-38-A	38	70	108	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1250	80	0.050	0.57	Internal geometry does no...
		AGS750-50-A	AGS750-50-A	50	82	132	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1250	60	0.066	0.64	Internal geometry does no...
		AGS750-63-A	AGS750-63-A	63	95	158	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1260	50	0.084	0.72	Internal geometry does no...
		AGS750-75-A	AGS750-75-A	75	107	182	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1260	40	0.100	0.79	Internal geometry does no...
		AGS750-80-A	AGS750-80-A	80	112	192	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1260	40	0.106	0.82	Internal geometry does no...
		AGS750-100-A	AGS750-100-A	100	132	232	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1260	30	0.133	0.95	Internal geometry does no...
		AGS750-125-A	AGS750-125-A	125	157	282	2	45	25	16.5	1	4	M8 x 6 (2x)	150	740	1260	25	0.167	1.10	Internal geometry does no...

Additional Information