With pressed cages - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (Grease) [rpm]	NO Limiting speeds (Oil) [rpm]

		7200BDF	10	30	18	0.6	7200BDF	10.1	5.05	0.260	14000	18000
		7200DF	10	30	18	0.6	7200DF	11.0	5.45	0.280	18000	23000
		7200CDF	10	30	18	0.6	7200CDF	11.8	5.85	0.300	25000	34000
		7300DF	10	35	22	0.6	7300DF	18.9	8.60	0.680	16000	21000
		7201BDF	12	32	20	0.6	7201BDF	15.1	7.50	0.530	12000	17000
		7201DF	12	32	20	0.6	7201DF	16.2	8.05	0.620	17000	21000
		7201CDF	12	32	20	0.6	7201CDF	17.2	8.55	0.670	24000	32000
		7301DF	12	37	24	1.0	7301DF	22.7	10.5	0.820	16000	19000
		7202BDF	15	35	22	0.6	7202BDF	15.1	7.85	0.520	11000	15000
		7202DF	15	35	22	0.6	7202DF	16.4	8.55	0.600	15000	19000
		7202CDF	15	35	22	0.6	7202CDF	17.6	9.15	0.680	20000	28000
		7302DF	15	42	26	1.0	7302DF	27.3	14.4	1.10	12000	16000
		7203BDF	17	40	24	0.6	7203BDF	19.0	10.1	0.660	9600	13000
		7203DF	17	40	24	0.6	7203DF	20.6	11.0	0.770	13000	16000
		7203CDF	17	40	24	0.6	7203CDF	22.1	11.8	0.880	18000	24000
		7303BDF	17	47	28	1.0	7303BDF	30.1	16.2	1.15	8800	12000
		7303CDF	17	47	28	1.0	7303CDF	32.2	16.8	1.30	16000	21000
		7303DF	17	47	28	1.0	7303DF	32.5	17.5	1.30	12000	14000
		7204BDF	20	47	28	1.0	7204BDF	28.6	16.8	1.10	8000	11000
		7204DF	20	47	28	1.0	7204DF	31.2	18.3	1.25	11000	13000
		7204CDF	20	47	28	1.0	7204CDF	33.4	19.6	1.45	15000	20000
		7304BDF	20	52	30	1.1	7304BDF	35.2	19.3	1.35	8000	10000
		7304DF	20	52	30	1.1	7304DF	38.0	20.8	1.60	10000	13000
		7304CDF	20	52	30	1.1	7304CDF	40.3	22.2	1.75	14000	19000
		7205BDF	25	52	30	1.0	7205BDF	29.9	18.8	1.15	7300	9600

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Shielded ZZ, ZZX

Shielded ZZ, ZZXJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

OILES CORPORATION

Bushings 70B - 70B

Bushings 70B - 70BOILES CORPORATION 15.04.2019

JTEKT Corporation(Koyo)

Double-row deep groove ball bearings

Double-row deep groove ball bearingsJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

Type SD30GNTN Corporation 02.11.2023

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cage

With machined cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NUJTEKT Corporation(Koyo) 05.06.2019

JTEKT Corporation(Koyo)

With pressed cage

With pressed cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open, With filling slot

Open, With filling slotJTEKT Corporation(Koyo) 16.01.2019