Open, With filling slot - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (grease) [rpm]	NO Limiting speeds (oil) [rpm]

		3200	10	30	14.3	0.6	3200	9.15	5.35	0.280	15000	20000
		3201	12	32	15.9	0.6	3201	12.1	7.15	0.370	14000	18000
		3202	15	35	15.9	0.6	3202	12.1	7.45	0.390	12000	16000
		3302	15	42	19.0	1.0	3302	19.0	11.9	0.610	10000	14000
		5203	17	40	17.5	0.6	5203	16.5	8.15	0.420	11000	14000
		3203	17	40	17.5	0.6	3203	17.2	10.8	0.560	11000	14000
		3303	17	47	22.2	1.0	3303	23.0	17.1	0.760	9400	13000
		3204	20	47	20.6	1.0	3204	21.5	15.0	0.770	9000	12000
		5204	20	47	20.6	1.0	5204	24.6	12.5	0.640	8800	12000
		3304	20	52	22.2	1.1	3304	26.0	18.4	0.950	8200	11000
		5304	20	52	22.2	1.1	5304	30.9	15.0	0.780	8300	11000
		3205	25	52	20.6	1.0	3205	23.7	18.2	0.940	7800	10000
		5205	25	52	20.6	1.0	5205	26.7	14.8	0.760	7700	10000
		3305	25	62	25.4	1.1	3305	36.2	26.5	1.35	6800	9100
		5305	25	62	25.4	1.1	5305	40.9	20.8	1.05	6900	9200
		3206	30	62	23.8	1.0	3206	34.1	27.0	1.40	6500	8700
		5206	30	62	23.8	1.0	5206	37.2	21.3	1.10	6400	8600
		3306	30	72	30.2	1.1	3306	47.7	36.1	1.85	5800	7800
		5306	30	72	30.2	1.1	5306	51.2	28.5	1.45	5800	7700
		3207	35	72	27.0	1.1	3207	46.0	37.5	1.95	5600	7500
		5207	35	72	27.0	1.1	5207	49.0	29.0	1.50	5500	7300
		3307	35	80	34.9	1.5	3307	60.7	46.8	2.40	5200	7000
		5307	35	80	34.9	1.5	5307	64.0	36.2	1.85	5100	6800
		3208	40	80	30.2	1.1	3208	52.4	43.9	2.25	5000	6700
		5208	40	80	30.2	1.1	5208	55.5	33.6	1.75	5000	6700

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

Shielded ZZJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Sealed 2RSJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cage

With machined cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

Open typeNTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

Jtekt North America

Open, With filling slot

Open, With filling slotJtekt North America 13.12.2018

JTEKT Corporation(Koyo)

with SetscrewJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

with SetscrewJTEKT Corporation(Koyo) 16.01.2019

NSK Rolling Bearing

Double-Row Angular Ball Bearings

Double-Row Angular Ball BearingsNSK Rolling Bearing 15.11.2023