With machined cages - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (grase) [rpm]	NO Limiting speeds (oil) [rpm]

		7900CDT FY	10	22	12	0.3	7900CDT FY	6.10	3.05	0.120	42000	55000
		7000BDT FY	10	26	16	0.3	7000BDT FY	9.40	4.35	0.220	20000	27000
		7000DT FY	10	26	16	0.3	7000DT FY	10.1	4.65	0.240	27000	34000
		7000CDT FY	10	26	16	0.3	7000CDT FY	10.7	4.95	0.250	37000	50000
		7200BDT FY	10	30	18	0.6	7200BDT FY	8.70	4.05	0.210	18000	23000
		7200DT FY	10	30	18	0.6	7200DT FY	9.50	4.40	0.230	23000	29000
		7200CDT FY	10	30	18	0.6	7200CDT FY	10.2	4.70	0.240	32000	43000
		7300DT FY	10	35	22	0.6	7300DT FY	17.3	7.55	0.590	21000	27000
		7901CDT FY	12	24	12	0.3	7901CDT FY	6.45	3.45	0.140	37000	49000
		7001BDT FY	12	28	16	0.3	7001BDT FY	10.1	5.05	0.260	18000	23000
		7001DT FY	12	28	16	0.3	7001DT FY	11.0	5.45	0.280	23000	29000
		7001CDT FY	12	28	16	0.3	7001CDT FY	11.8	5.85	0.300	32000	43000
		7201BDT FY	12	32	20	0.6	7201BDT FY	14.0	6.80	0.480	16000	22000
		7201DT FY	12	32	20	0.6	7201DT FY	15.1	7.25	0.560	22000	27000
		7201CDT FY	12	32	20	0.6	7201CDT FY	16.0	7.70	0.600	30000	40000
		7301DT FY	12	37	24	1.0	7301DT FY	20.7	9.20	0.720	20000	24000
		7902CDT FY	15	28	14	0.3	7902CDT FY	9.65	5.30	0.210	31000	41000
		7002BDT FY	15	32	18	0.3	7002BDT FY	11.3	6.30	0.320	15000	20000
		7002DT FY	15	32	18	0.3	7002DT FY	12.4	6.85	0.350	20000	26000
		7002CDT FY	15	32	18	0.3	7002CDT FY	13.4	7.40	0.380	28000	37000
		7202BDT FY	15	35	22	0.6	7202BDT FY	15.1	7.85	0.520	14000	19000
		7202DT FY	15	35	22	0.6	7202DT FY	16.4	8.55	0.600	19000	24000
		7202CDT FY	15	35	22	0.6	7202CDT FY	17.6	9.15	0.680	26000	35000
		7302DT FY	15	42	26	1.0	7302DT FY	25.4	12.9	0.990	16000	20000
		7903CDT FY	17	30	14	0.3	7903CDT FY	10.1	5.90	0.240	28000	38000

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open, With filling slot

Open, With filling slotJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Shielded ZZJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cage

With machined cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Metric seriesJTEKT Corporation(Koyo) 20.09.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Contact Sealed 2RS

Contact Sealed 2RSJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cage

With pressed cageJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

Tandem arrangement DT

Tandem arrangement DTNTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

TDO typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Sealed 2RSJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

NSK Rolling Bearing

Back-to-Back DB

Back-to-Back DBNSK Rolling Bearing 07.06.2024