With snap ring groove N - NTN Corporation

CAD模型選擇

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA 明細表	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Width [mm]	R Radius [mm]	ORDER [mm]	CR Basic load ratings [kN]	COR Basic Static Load Ratings [kN]	CU Fatigue load limit [kN]	LSG Limiting Speeds (Grease) [min^-1]	LSO Limiting Speeds (Oil) [min^-1]	MASS mass [kg]	D1 max [mm]	A max [mm]	BA min [mm]	R0 max [mm]	D2 max [mm]

		60/22N	22	44	12	0.6	60/22N	10.4	5.05	0.5	17000	20000	0.074	41.75	2.06	1.35	0.40	48.3
		60/28N	28	52	12	0.6	60/28N	13.8	7.4	0.5	14000	16000	0.098	49.73	2.06	1.35	0.40	57.9
		60/32N	32	58	13	1.0	60/32N	13.1	8.05	0.5	12000	15000	0.129	55.60	2.08	1.35	0.40	63.7
		6002N	15	32	9	0.3	6002N	6.2	2.84	0.3	22000	26000	0.03	30.15	2.06	1.35	0.40	36.7
		6003N	17	35	10	0.3	6003N	7.55	3.35	0.3	20000	24000	0.039	33.17	2.06	1.35	0.40	39.7
		6004N	20	42	12	0.6	6004N	10.4	5.05	0.5	18000	21000	0.069	39.75	2.06	1.35	0.40	46.3
		6005N	25	47	12	0.6	6005N	11.2	5.85	0.5	15000	18000	0.08	44.60	2.06	1.35	0.40	52.7
		6006N	30	55	13	1.0	6006N	14.7	8.3	0.5	13000	15000	0.116	52.60	2.08	1.35	0.40	60.7
		6007N	35	62	14	1.0	6007N	17.7	10.3	0.5	12000	14000	0.155	59.61	2.08	1.90	0.60	67.7
		6008N	40	68	15	1.0	6008N	18.6	11.5	0.5	10000	12000	0.19	64.82	2.49	1.90	0.60	74.6
		6009N	45	75	16	1.0	6009N	23.2	15.1	0.5	9200	11000	0.237	71.83	2.49	1.90	0.60	81.6
		6010N	50	80	16	1.0	6010N	24.2	16.6	0.5	8400	9800	0.261	76.81	2.49	1.90	0.60	86.6
		6011N	55	90	18	1.1	6011N	31.5	21.2	0.5	7700	9000	0.388	86.79	2.87	2.70	0.60	96.5
		6012N	60	95	18	1.1	6012N	32.5	23.2	0.5	7000	8300	0.414	91.82	2.87	2.70	0.60	101.6
		6013N	65	100	18	1.1	6013N	34	25.2	0.5	6500	7700	0.421	96.80	2.87	2.70	0.60	106.5
		6014N	70	110	20	1.1	6014N	42	31	0.5	6100	7100	0.604	106.81	2.87	2.70	0.60	116.6
		6015N	75	115	20	1.1	6015N	44	33.5	0.5	5700	6700	0.649	111.81	2.87	2.70	0.60	121.6
		6016N	80	125	22	1.1	6016N	53	40	0.5	5300	6200	0.854	120.22	2.87	3.10	0.60	134.7
		6017N	85	130	22	1.1	6017N	55	43	0.5	5000	5900	0.89	125.22	2.87	3.10	0.60	139.7
		6018N	90	140	24	1.5	6018N	64.5	49.5	0.5	4700	5600	1.02	135.23	3.71	3.10	0.60	149.7
		6019N	95	145	24	1.5	6019N	67	54	0.5	4500	5300	1.08	140.23	3.71	3.10	0.60	154.7
		6020N	100	150	24	1.5	6020N	66.5	54	0.5	4200	5000	1.15	145.24	3.71	3.10	0.60	159.7
		6021N	105	160	26	2.0	6021N	80.5	65.5	0.5	4000	4700	1.59	155.22	3.71	3.10	0.60	169.7
		6022N	110	170	28	2.0	6022N	91	73	0.5	3800	4500	1.96	163.65	3.71	3.50	0.60	182.9
		6024N	120	180	28	2.0	6024N	94	79.5	0.5	3500	4100	2.07	173.66	3.71	3.50	0.60	192.9

Additional Information

看過這個的用戶也對此感興趣

NTN Corporation

With snap ring NR

With snap ring NRNTN Corporation 17.10.2023

NTN Corporation

Open typeNTN Corporation 17.10.2023

NTN Corporation

Open typeNTN Corporation 17.10.2023

NTN Corporation

Shielded type ZZ

Shielded type ZZNTN Corporation 17.10.2023

NSK Rolling Bearing

With Snap Ring (Open Type) NR

With Snap Ring (Open Type) NRNSK Rolling Bearing 15.11.2023

NTN Corporation

Series AN 00-40

Series AN 00-40NTN Corporation 17.10.2023

NTN Corporation

Non-contact sealed type LLB,LLF

Non-contact sealed type LLB,LLFNTN Corporation 17.10.2023

NSK Rolling Bearing

With Snap Ring Groove (Open Type) N

With Snap Ring Groove (Open Type) NNSK Rolling Bearing 15.11.2023

NTN Corporation

Contact Sealed type LLU

Contact Sealed type LLUNTN Corporation 17.10.2023

KYOUIKU GEAR MFG, CO., LTD.

Precision Ground Rack Gears

Precision Ground Rack GearsKYOUIKU GEAR MFG, CO., LTD. 14.09.2023

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

Standard Type LM

Standard Type LMTHK CO.,LTD. 23.05.2024

NISSEI Corporation

Concentric hollow shaft (F3S type)

Concentric hollow shaft (F3S type)NISSEI Corporation 22.09.2022

BB1_001_101 - Deep groove ball bearings

BB1_001_101 - Deep groove ball bearingsSKF 29.05.2024