With machined cage - JTEKT Corporation(Koyo)

??

CAD-Modellauswahl

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Stückliste	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (Grease) [rpm]	NO Limitng speeds (Oil) [rpm]

		7900C FY	10	22	6	0.3	7900C FY	3.75	1.50	0.060	52000	69000
		7000B FY	10	26	8	0.3	7000B FY	5.80	2.15	0.110	25000	33000
		7000 FY	10	26	8	0.3	7000 FY	6.25	2.35	0.120	34000	42000
		7000C FY	10	26	8	0.3	7000C FY	6.60	2.45	0.130	47000	62000
		7200B FY	10	30	9	0.6	7200B FY	5.35	2.00	0.100	22000	29000
		7200 FY	10	30	9	0.6	7200 FY	5.85	2.20	0.110	29000	37000
		7200C FY	10	30	9	0.6	7200C FY	6.25	2.35	0.120	40000	54000
		7300 FY	10	35	11	0.6	7300 FY	10.6	3.75	0.300	27000	33000
		7901C FY	12	24	6	0.3	7901C FY	4.00	1.70	0.070	48000	62000
		7001B FY	12	28	8	0.3	7001B FY	6.20	2.50	0.130	22000	29000
		7001 FY	12	28	8	0.3	7001 FY	6.75	2.75	0.140	29000	37000
		7001C FY	12	28	8	0.3	7001C FY	7.25	2.95	0.150	40000	54000
		7201B FY	12	32	10	0.6	7201B FY	8.65	3.40	0.240	20000	27000
		7201 FY	12	32	10	0.6	7201 FY	9.30	3.65	0.280	27000	34000
		7201C FY	12	32	10	0.6	7201C FY	9.90	3.85	0.300	38000	50000
		7301 FY	12	37	12	1.0	7301 FY	12.8	4.60	0.360	24000	31000
		7902C FY	15	28	7	0.3	7902C FY	5.95	2.65	0.110	39000	52000
		7002B FY	15	32	9	0.3	7002B FY	6.95	3.15	0.160	19000	25000
		7002 FY	15	32	9	0.3	7002 FY	7.65	3.45	0.180	26000	32000
		7002C FY	15	32	9	0.3	7002C FY	8.25	3.70	0.190	35000	47000
		7202B FY	15	35	11	0.6	7202B FY	9.30	3.95	0.260	18000	24000
		7202 FY	15	35	11	0.6	7202 FY	10.1	4.25	0.300	24000	29000
		7202C FY	15	35	11	0.6	7202C FY	10.8	4.55	0.340	33000	43000
		7302 FY	15	42	13	1.0	7302 FY	15.7	6.45	0.490	20000	25000
		7903C FY	17	30	7	0.3	7903C FY	6.25	2.95	0.120	36000	47000

Zusätzliche Informationen

Benutzer, die sich dieses Teil angesehen haben, interessierten sich auch für die folgenden Teile

JTEKT Corporation(Koyo)

With pressed cage

With pressed cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NN Tapered bore

NN Tapered boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Shielded ZZ, ZZX

Shielded ZZ, ZZXJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

NSK Rolling Bearing

79 typeNSK Rolling Bearing 07.06.2024

JTEKT Corporation(Koyo)

Metric seriesJTEKT Corporation(Koyo) 20.09.2019

NTN Corporation

SingleNTN Corporation 17.10.2023

RTWN, RTWS - Retaining Rings - C - Internal

RTWN, RTWS - Retaining Rings - C - InternalMisumi 30.06.2021

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Contact Sealed 2RS

Contact Sealed 2RSJTEKT Corporation(Koyo) 16.01.2019

NSK Rolling Bearing

SingleNSK Rolling Bearing 07.06.2024

JTEKT Corporation(Koyo)

With locating snap ring NR

With locating snap ring NRJTEKT Corporation(Koyo) 16.01.2019