Type J-Radial,with both sealed type - NTN Corporation

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15

		LINA Bill of material	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Width [mm]	C Chamfer [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic load ratings [kN]	COR Basic Static Load Ratings [kN]	CU Fatigue load limit [kN]	MASS mass [kg]	N Diameter [mm]	P Diameter [mm]

		KRJ040LL	101.60	120.65	12.7	0.4	KRJ040LL	11.4	12.4	0.505	0.249	105.5	115.9
		KRJ042LL	107.95	127.00	12.7	0.4	KRJ042LL	11.7	13.0	0.520	0.263	111.8	122.2
		KRJ045LL	114.30	133.35	12.7	0.4	KRJ045LL	11.9	13.7	0.530	0.277	118.2	128.6
		KRJ047LL	120.65	139.70	12.7	0.4	KRJ047LL	12.1	14.4	0.545	0.295	124.6	135.0
		KRJ050LL	127.00	146.05	12.7	0.4	KRJ050LL	12.4	15.0	0.555	0.308	130.9	141.3
		KRJ055LL	139.70	158.75	12.7	0.4	KRJ055LL	12.8	16.4	0.580	0.336	143.6	154.0
		KRJ060LL	152.40	171.45	12.7	0.4	KRJ060LL	13.2	17.7	0.600	0.367	156.3	166.7
		KRJ065LL	165.10	184.15	12.7	0.4	KRJ065LL	13.6	19.1	0.620	0.395	169.0	179.4
		KRJ070LL	177.80	196.85	12.7	0.4	KRJ070LL	13.9	20.4	0.640	0.422	181.7	192.1
		KRJ075LL	190.50	209.55	12.7	0.4	KRJ075LL	14.3	21.7	0.660	0.450	194.4	204.8
		KRJ080LL	203.20	222.25	12.7	0.4	KRJ080LL	14.6	23.1	0.680	0.481	207.1	217.5
		KRJ090LL	228.60	247.65	12.7	0.4	KRJ090LL	15.2	25.7	0.720	0.535	232.5	242.9
		KRJ100LL	254.00	273.05	12.7	0.4	KRJ100LL	15.8	28.4	0.755	0.594	257.9	268.3
		KRJ110LL	279.40	298.45	12.7	0.4	KRJ110LL	16.3	31.0	0.790	0.648	283.3	293.7
		KRJ1200LL	304.80	323.85	12.7	0.4	KRJ1200LL	16.8	34.0	0.820	0.708	308.7	319.1

Additional Information

Users who viewed this, were also interested in

NTN Corporation

Type H-Angular,with single sealed type

Type H-Angular,with single sealed typeNTN Corporation 17.10.2023

NTN Corporation

Series AN 00-40

Series AN 00-40NTN Corporation 17.10.2023

NTN Corporation

Type S,Type A - Radial

Type S,Type A - RadialNTN Corporation 17.10.2023

NTN Corporation

Bent inner tab type

Bent inner tab typeNTN Corporation 17.10.2023

NTN Corporation

Type J-Four-Point Contact,with both sealed type

Type J-Four-Point Contact,with both sealed typeNTN Corporation 17.10.2023

NTN Corporation

Open typeNTN Corporation 17.10.2023

NTN Corporation

Type S,Type A-Four-Point Contact

Type S,Type A-Four-Point ContactNTN Corporation 17.10.2023

NTN Corporation

Type SNZ2NTN Corporation 08.08.2022

NTN Corporation

UCC Cylindrical cartridge units

UCC Cylindrical cartridge unitsNTN Corporation 17.10.2023

NTN Corporation

Metric system sizes

Metric system sizesNTN Corporation 17.10.2023

DIN 7603 C - Sealing rings, form C, fill gasket

DIN 7603 C - Sealing rings, form C, fill gasketFabory 13.02.2023

NTN Corporation

With single shield Z

With single shield ZNTN Corporation 17.10.2023

NTN Corporation

Cylindrical bore

Cylindrical boreNTN Corporation 17.10.2023

NTN Corporation

Type SL01-48,Type SL01-49

Type SL01-48,Type SL01-49NTN Corporation 17.10.2023