SM Ø 60 - Medium load - Special Springs

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11

		LINA Bill of material	CODE - ⁿ/ₐ	DO Hole diameter [mm]	DI Rod diameter [mm]	LO Free length [mm]	RG Rate /±10% [N/mm]	FX Force [N]	LX Length at compression end [mm]	S1 Recommended working deflection for long spring life [mm]	F1 Force [N]	S2 Recommended working deflection for medium spring life [mm]	F2 Force [N]	SN Maximum operating deflection [mm]	FN Force [N]	SB Solid deflection [mm]	MAT Material ⁿ/ₐ	BXH Cross wire section [mm]	H Cross wire section [mm]

		SM60-060	SM60-060	60.0	30.0	60	366.7	0.000	60.000	15.4	5640	17.3	6350	19.2	7060	22.8	Cr-Si	14,25 x 7,65	7.650
		SM60-070	SM60-070	60.0	30.0	70	314.7	0.000	70.000	17.9	5640	20.2	6350	22.4	7060	26.6	Cr-Si	14,25 x 7,65	7.650
		SM60-080	SM60-080	60.0	30.0	80	275.7	0.000	80.000	20.5	5640	23.0	6350	25.6	7060	30.4	Cr-Si	14,25 x 7,65	7.650
		SM60-090	SM60-090	60.0	30.0	90	245.1	0.000	90.000	23.0	5640	25.9	6350	28.8	7060	34.2	Cr-Si	14,25 x 7,65	7.650
		SM60-100	SM60-100	60.0	30.0	100	220.6	0.000	100.000	25.6	5640	28.8	6350	32.0	7060	38.0	Cr-Si	14,25 x 7,65	7.650
		SM60-125	SM60-125	60.0	30.0	125	176.5	0.000	125.000	32.0	5640	36.0	6350	40.0	7060	47.5	Cr-Si	14,25 x 7,65	7.650
		SM60-150	SM60-150	60.0	30.0	150	147.1	0.000	150.000	38.4	5640	43.2	6350	48.0	7060	57.0	Cr-Si	14,25 x 7,65	7.650
		SM60-175	SM60-175	60.0	30.0	175	126.0	0.000	175.000	44.8	5640	50.4	6350	56.0	7060	66.5	Cr-Si	14,25 x 7,65	7.650
		SM60-200	SM60-200	60.0	30.0	200	110.3	0.000	200.000	51.2	5640	57.6	6350	64.0	7060	76.0	Cr-Si	14,25 x 7,65	7.650
		SM60-250	SM60-250	60.0	30.0	250	88.2	0.000	250.000	64.0	5640	72.0	6350	80.0	7060	95.0	Cr-Si	14,25 x 7,65	7.650
		SM60-300	SM60-300	60.0	30.0	300	73.5	0.000	300.000	76.8	5640	86.4	6350	96.0	7060	114.0	Cr-Si	14,25 x 7,65	7.650