SAF - Flanged Bushing

English	日本語

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	CNSORDERNO Parts No. ⁿ/ₐ	ND Bushing Inner Diameter [mm]	IDH Recommended Housing Inner Diameter [mm]	IDHT Recommended Housing I.D. Tolerance [mm]	GPHL Recommended General Purpose (Heavy load) [mm]	GPHLT Recommended General Purpose (Heavy load) Tolerance [mm]	GPLL Recommended General Purpose (Light load) [mm]	GPLLT Recommended General Purpose (Light load) Tolerance [mm]	HAC Recommended High Accuracy Purpose [mm]	HACT Recommended High Accuracy Purpose Tolerance [mm]	ODF Bushing Flange O.D. [mm]	ODFT Bushing Flange O.D. Tolerance [mm]	FT Bushing Flange Thickness [mm]	FTT Bushing Flange Thickness Tolerance [mm]	ID Bushing Inner Diameter [mm]	IDT Bushing Inner Diameter Tolerance [mm]	OD Bushing Outer Diameter [mm]	ODT Bushing Outer Diameter Tolerance [mm]	L Bushing Length [mm]	LT Bushing Length Tolerance [mm]	COD Bushing Chamfer on O.D. [mm]	CID Bushing Chamfer on I.D. [mm]

SAF0610	SAF0610	6.0	10	H7(+0.015/0)	6.0	d8(-0.030/-0.048)	6.0	e7(-0.020/-0.032)	6.0	f7(-0.010/-0.022)	16	±0.25	2	0/-0.1	6.0	+0.032/+0.020	10	+0.028/+0.019	10	-0.1/-0.3	1.5×15°	1×10°
SAF0612	SAF0612	6.0	10	H7(+0.015/0)	6.0	d8(-0.030/-0.048)	6.0	e7(-0.020/-0.032)	6.0	f7(-0.010/-0.022)	16	±0.25	2	0/-0.1	6.0	+0.032/+0.020	10	+0.028/+0.019	12	-0.1/-0.3	1.5×15°	1×10°
SAF0615	SAF0615	6.0	10	H7(+0.015/0)	6.0	d8(-0.030/-0.048)	6.0	e7(-0.020/-0.032)	6.0	f7(-0.010/-0.022)	16	±0.25	2	0/-0.1	6.0	+0.032/+0.020	10	+0.028/+0.019	15	-0.1/-0.3	1.5×15°	1×10°
SAF0810	SAF0810	8.0	12	H7(+0.018/0)	8.0	d8(-0.040/-0.062)	8.0	e7(-0.025/-0.040)	8.0	f7(-0.013/-0.028)	20	±0.25	2	0/-0.1	8.0	+0.045/+0.030	12	+0.038/+0.023	10	-0.1/-0.3	0.75×15°	1×10°
SAF0812	SAF0812	8.0	12	H7(+0.018/0)	8.0	d8(-0.040/-0.062)	8.0	e7(-0.025/-0.040)	8.0	f7(-0.013/-0.028)	20	±0.25	2	0/-0.1	8.0	+0.045/+0.030	12	+0.038/+0.023	12	-0.1/-0.3	0.75×15°	1×10°
SAF0815	SAF0815	8.0	12	H7(+0.018/0)	8.0	d8(-0.040/-0.062)	8.0	e7(-0.025/-0.040)	8.0	f7(-0.013/-0.028)	20	±0.25	2	0/-0.1	8.0	+0.045/+0.030	12	+0.038/+0.023	15	-0.1/-0.3	0.75×15°	1×10°
SAF1010	SAF1010	10.0	14	H7(+0.018/0)	10.0	d8(-0.040/-0.062)	10.0	e7(-0.025/-0.040)	10.0	f7(-0.013/-0.028)	22	±0.25	2	0/-0.1	10.0	+0.045/+0.030	14	+0.038/+0.023	10	-0.1/-0.3	0.75×15°	1×10°
SAF1012	SAF1012	10.0	14	H7(+0.018/0)	10.0	d8(-0.040/-0.062)	10.0	e7(-0.025/-0.040)	10.0	f7(-0.013/-0.028)	22	±0.25	2	0/-0.1	10.0	+0.045/+0.030	14	+0.038/+0.023	12	-0.1/-0.3	0.75×15°	1×10°
SAF1015	SAF1015	10.0	14	H7(+0.018/0)	10.0	d8(-0.040/-0.062)	10.0	e7(-0.025/-0.040)	10.0	f7(-0.013/-0.028)	22	±0.25	2	0/-0.1	10.0	+0.045/+0.030	14	+0.038/+0.023	15	-0.1/-0.3	0.75×15°	1×10°
SAF1017	SAF1017	10.0	14	H7(+0.018/0)	10.0	d8(-0.040/-0.062)	10.0	e7(-0.025/-0.040)	10.0	f7(-0.013/-0.028)	22	±0.25	2	0/-0.1	10.0	+0.045/+0.030	14	+0.038/+0.023	17	-0.1/-0.3	0.75×15°	1×10°
SAF1020	SAF1020	10.0	14	H7(+0.018/0)	10.0	d8(-0.040/-0.062)	10.0	e7(-0.025/-0.040)	10.0	f7(-0.013/-0.028)	22	±0.25	2	0/-0.1	10.0	+0.045/+0.030	14	+0.038/+0.023	20	-0.1/-0.3	0.75×15°	1×10°
SAF1210	SAF1210	12.0	18	H7(+0.018/0)	12.0	d8(-0.050/-0.077)	12.0	e7(-0.032/-0.050)	12.0	f7(-0.016/-0.034)	25	±0.25	3	0/-0.1	12.0	+0.050/+0.032	18	+0.038/+0.023	10	-0.1/-0.3	2×15°	2×10°
SAF1212	SAF1212	12.0	18	H7(+0.018/0)	12.0	d8(-0.050/-0.077)	12.0	e7(-0.032/-0.050)	12.0	f7(-0.016/-0.034)	25	±0.25	3	0/-0.1	12.0	+0.050/+0.032	18	+0.038/+0.023	12	-0.1/-0.3	2×15°	2×10°
SAF1215	SAF1215	12.0	18	H7(+0.018/0)	12.0	d8(-0.050/-0.077)	12.0	e7(-0.032/-0.050)	12.0	f7(-0.016/-0.034)	25	±0.25	3	0/-0.1	12.0	+0.050/+0.032	18	+0.038/+0.023	15	-0.1/-0.3	2×15°	2×10°
SAF1220	SAF1220	12.0	18	H7(+0.018/0)	12.0	d8(-0.050/-0.077)	12.0	e7(-0.032/-0.050)	12.0	f7(-0.016/-0.034)	25	±0.25	3	0/-0.1	12.0	+0.050/+0.032	18	+0.038/+0.023	20	-0.1/-0.3	2×15°	2×10°
SAF1225	SAF1225	12.0	18	H7(+0.018/0)	12.0	d8(-0.050/-0.077)	12.0	e7(-0.032/-0.050)	12.0	f7(-0.016/-0.034)	25	±0.25	3	0/-0.1	12.0	+0.050/+0.032	18	+0.038/+0.023	25	-0.1/-0.3	2×15°	2×10°
SAF1230	SAF1230	12.0	18	H7(+0.018/0)	12.0	d8(-0.050/-0.077)	12.0	e7(-0.032/-0.050)	12.0	f7(-0.016/-0.034)	25	±0.25	3	0/-0.1	12.0	+0.050/+0.032	18	+0.038/+0.023	30	-0.1/-0.3	2×15°	2×10°
SAF1310	SAF1310	13.0	19	H7(+0.021/0)	13.0	d8(-0.050/-0.077)	13.0	e7(-0.032/-0.050)	13.0	f7(-0.016/-0.034)	26	±0.25	3	0/-0.1	13.0	+0.060/+0.042	19	+0.045/+0.028	10	-0.1/-0.3	2×15°	2×10°
SAF1312	SAF1312	13.0	19	H7(+0.021/0)	13.0	d8(-0.050/-0.077)	13.0	e7(-0.032/-0.050)	13.0	f7(-0.016/-0.034)	26	±0.25	3	0/-0.1	13.0	+0.060/+0.042	19	+0.045/+0.028	12	-0.1/-0.3	2×15°	2×10°
SAF1315	SAF1315	13.0	19	H7(+0.021/0)	13.0	d8(-0.050/-0.077)	13.0	e7(-0.032/-0.050)	13.0	f7(-0.016/-0.034)	26	±0.25	3	0/-0.1	13.0	+0.060/+0.042	19	+0.045/+0.028	15	-0.1/-0.3	2×15°	2×10°
SAF1320	SAF1320	13.0	19	H7(+0.021/0)	13.0	d8(-0.050/-0.077)	13.0	e7(-0.032/-0.050)	13.0	f7(-0.016/-0.034)	26	±0.25	3	0/-0.1	13.0	+0.060/+0.042	19	+0.045/+0.028	20	-0.1/-0.3	2×15°	2×10°
SAF1325	SAF1325	13.0	19	H7(+0.021/0)	13.0	d8(-0.050/-0.077)	13.0	e7(-0.032/-0.050)	13.0	f7(-0.016/-0.034)	26	±0.25	3	0/-0.1	13.0	+0.060/+0.042	19	+0.045/+0.028	25	-0.1/-0.3	2×15°	2×10°
SAF1330	SAF1330	13.0	19	H7(+0.021/0)	13.0	d8(-0.050/-0.077)	13.0	e7(-0.032/-0.050)	13.0	f7(-0.016/-0.034)	26	±0.25	3	0/-0.1	13.0	+0.060/+0.042	19	+0.045/+0.028	30	-0.1/-0.3	2×15°	2×10°
SAF1415	SAF1415	14.0	20	H7(+0.021/0)	14.0	d8(-0.050/-0.077)	14.0	e7(-0.032/-0.050)	14.0	f7(-0.016/-0.034)	27	±0.25	3	0/-0.1	14.0	+0.060/+0.042	20	+0.045/+0.028	15	-0.1/-0.3	2×15°	2×10°
SAF1420	SAF1420	14.0	20	H7(+0.021/0)	14.0	d8(-0.050/-0.077)	14.0	e7(-0.032/-0.050)	14.0	f7(-0.016/-0.034)	27	±0.25	3	0/-0.1	14.0	+0.060/+0.042	20	+0.045/+0.028	20	-0.1/-0.3	2×15°	2×10°

Additional Information

Users who viewed this, were also interested in

No Third-party Cookies supported

SAF - Flanged Bushing