HK - Lead-free metal bearing for underwater application

English	日本語

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	CNSORDERNO Parts No. ⁿ/ₐ	ND Bushing Inner Diameter [mm]	IDH Recommended Housing Inner Diameter [mm]	IDHT Recommended Housing I.D. Tolerance [mm]	GPHL Recommended General Purpose (Heavy load) [mm]	GPHLT Recommended General Purpose (Heavy load) Tolerance [mm]	GPLL Recommended General Purpose (Light load) [mm]	GPLLT Recommended General Purpose (Light load) Tolerance [mm]	ID Bushing Inner Diameter [mm]	IDT Bushing Inner Diameter Tolerance [mm]	OD Bushing Outer Diameter [mm]	ODT Bushing Outer Diameter Tolerance [mm]	L Bushing Length [mm]	FC Bushing Face C [mm]	COD Bushing Chamfer on O.D. [mm]	CID Bushing Chamfer on I.D. [mm]

HK121820	HK121820	12	18	H7(+0.018/0)	12	b9(-0.150/-0.193)	12	d8(-0.050/-0.077)	12	+0.050/+0.032	18	+0.034/+0.023	20	C0.5	2×15°	2×10°
HK152120	HK152120	15	21	H7(+0.021/0)	15	b9(-0.150/-0.193)	15	d8(-0.050/-0.077)	15	+0.050/+0.032	21	+0.041/+0.028	20	C0.5	2×15°	2×10°
HK162220	HK162220	16	22	H7(+0.021/0)	16	b9(-0.150/-0.193)	16	d8(-0.050/-0.077)	16	+0.050/+0.032	22	+0.041/+0.028	20	C0.5	2×15°	2×10°
HK162230	HK162230	16	22	H7(+0.021/0)	16	b9(-0.150/-0.193)	16	d8(-0.050/-0.077)	16	+0.050/+0.032	22	+0.041/+0.028	30	C0.5	2×15°	2×10°
HK182420	HK182420	18	24	H7(+0.021/0)	18	b9(-0.150/-0.193)	18	d8(-0.050/-0.077)	18	+0.050/+0.032	24	+0.041/+0.028	20	C0.5	2×15°	2×10°
HK203020	HK203020	20	30	H7(+0.021/0)	20	b9(-0.160/-0.212)	20	d8(-0.065/-0.098)	20	+0.061/+0.040	30	+0.041/+0.028	20	C0.5	2×15°	2×10°
HK203030	HK203030	20	30	H7(+0.021/0)	20	b9(-0.160/-0.212)	20	d8(-0.065/-0.098)	20	+0.061/+0.040	30	+0.041/+0.028	30	C0.5	2×15°	2×10°
HK203040	HK203040	20	30	H7(+0.021/0)	20	b9(-0.160/-0.212)	20	d8(-0.065/-0.098)	20	+0.061/+0.040	30	+0.041/+0.028	40	C0.5	2×15°	2×10°
HK253520	HK253520	25	35	H7(+0.025/0)	25	b9(-0.160/-0.212)	25	d8(-0.065/-0.098)	25	+0.061/+0.040	35	+0.050/+0.034	20	C0.5	2.5×15°	2.5×10°
HK253525	HK253525	25	35	H7(+0.025/0)	25	b9(-0.160/-0.212)	25	d8(-0.065/-0.098)	25	+0.061/+0.040	35	+0.050/+0.034	25	C0.5	2.5×15°	2.5×10°
HK253530	HK253530	25	35	H7(+0.025/0)	25	b9(-0.160/-0.212)	25	d8(-0.065/-0.098)	25	+0.061/+0.040	35	+0.050/+0.034	30	C0.5	2.5×15°	2.5×10°
HK253540	HK253540	25	35	H7(+0.025/0)	25	b9(-0.160/-0.212)	25	d8(-0.065/-0.098)	25	+0.061/+0.040	35	+0.050/+0.034	40	C0.5	2.5×15°	2.5×10°
HK253550	HK253550	25	35	H7(+0.025/0)	25	b9(-0.160/-0.212)	25	d8(-0.065/-0.098)	25	+0.061/+0.040	35	+0.050/+0.034	50	C0.5	2.5×15°	2.5×10°
HK304020	HK304020	30	40	H7(+0.025/0)	30	b9(-0.160/-0.212)	30	d8(-0.065/-0.098)	30	+0.061/+0.040	40	+0.050/+0.034	20	C0.5	3×15°	3×10°
HK304025	HK304025	30	40	H7(+0.025/0)	30	b9(-0.160/-0.212)	30	d8(-0.065/-0.098)	30	+0.061/+0.040	40	+0.050/+0.034	25	C0.5	3×15°	3×10°
HK304030	HK304030	30	40	H7(+0.025/0)	30	b9(-0.160/-0.212)	30	d8(-0.065/-0.098)	30	+0.061/+0.040	40	+0.050/+0.034	30	C0.5	3×15°	3×10°
HK304040	HK304040	30	40	H7(+0.025/0)	30	b9(-0.160/-0.212)	30	d8(-0.065/-0.098)	30	+0.061/+0.040	40	+0.050/+0.034	40	C0.5	3×15°	3×10°
HK304050	HK304050	30	40	H7(+0.025/0)	30	b9(-0.160/-0.212)	30	d8(-0.065/-0.098)	30	+0.061/+0.040	40	+0.050/+0.034	50	C0.5	3×15°	3×10°
HK354520	HK354520	35	45	H7(+0.025/0)	35	b9(-0.170/-0.232)	35	d8(-0.080/-0.119)	35	+0.075/+0.050	45	+0.050/+0.034	20	C0.5	3×15°	3×10°
HK354530	HK354530	35	45	H7(+0.025/0)	35	b9(-0.170/-0.232)	35	d8(-0.080/-0.119)	35	+0.075/+0.050	45	+0.050/+0.034	30	C0.5	3×15°	3×10°
HK354535	HK354535	35	45	H7(+0.025/0)	35	b9(-0.170/-0.232)	35	d8(-0.080/-0.119)	35	+0.075/+0.050	45	+0.050/+0.034	35	C0.5	3×15°	3×10°
HK354540	HK354540	35	45	H7(+0.025/0)	35	b9(-0.170/-0.232)	35	d8(-0.080/-0.119)	35	+0.075/+0.050	45	+0.050/+0.034	40	C0.5	3×15°	3×10°
HK354550	HK354550	35	45	H7(+0.025/0)	35	b9(-0.170/-0.232)	35	d8(-0.080/-0.119)	35	+0.075/+0.050	45	+0.050/+0.034	50	C0.5	3×15°	3×10°
HK354560	HK354560	35	45	H7(+0.025/0)	35	b9(-0.170/-0.232)	35	d8(-0.080/-0.119)	35	+0.075/+0.050	45	+0.050/+0.034	60	C0.5	3×15°	3×10°
HK405030	HK405030	40	50	H7(+0.025/0)	40	b9(-0.170/-0.232)	40	d8(-0.080/-0.119)	40	+0.075/+0.050	50	+0.050/+0.034	30	C0.5	3×15°	3×10°

Additional Information

Users who viewed this, were also interested in

No Third-party Cookies supported

HK - Lead-free metal bearing for underwater application