With flat back faces - JTEKT Corporation(Koyo)

??

Výběr CAD modelu

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Kusovník	SD Inside Diameter [mm]	D Outside Diameter [mm]	D1 Inside Diameter [mm]	T Bearing Width [mm]	R Radius [mm]	SD1 Outside Diameter [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (grease) [rpm]	NO Limiting speeds (oil) [rpm]

		51100	10	24	24	9	0	11	51100	12.5	14.0	0.630	6500	10000
		51200	10	26	26	11	1	12	51200	15.8	17.1	0.770	5700	8800
		51101	12	26	26	9	0	13	51101	12.9	14.0	0.690	6500	10000
		51201	12	28	28	11	1	14	51201	16.5	19.0	0.860	5400	8300
		51102	15	28	28	9	0	16	51102	13.2	15.4	0.760	6100	9400
		51202	15	32	32	12	1	17	51202	20.8	24.8	1.10	4900	7500
		51103	17	30	30	9	0	18	51103	13.5	18.2	0.820	6100	9400
		51203	17	35	35	12	1	19	51203	21.5	27.3	1.25	4900	7500
		51104	20	35	35	10	0	21	51104	17.8	24.7	1.10	5100	7900
		51204	20	40	40	14	1	22	51204	27.9	37.7	1.70	3900	6000
		51105	25	42	42	11	1	26	51105	24.4	37.2	1.70	4400	6800
		51205	25	47	47	15	1	27	51205	34.6	50.4	2.30	3600	5500
		51305	25	52	52	18	1	27	51305	44.7	61.4	2.75	3100	4800
		51405	25	60	60	24	1	27	51405	69.5	89.4	4.05	2600	4000
		51106	30	47	47	11	1	32	51106	25.5	42.2	1.90	4300	6600
		51206	30	52	52	16	1	32	51206	36.7	58.2	2.65	3400	5200
		51306	30	60	60	21	1	32	51306	53.5	78.7	3.55	2700	4200
		51406	30	70	70	28	1	32	51406	91.0	126	5.70	2200	3400
		51107	35	52	52	12	1	37	51107	25.5	47.2	2.00	3900	6000
		51207	35	62	62	18	1	37	51207	48.9	78.2	3.55	2900	4500
		51307	35	68	68	24	1	37	51307	69.3	105	4.75	2400	3700
		51407	35	80	80	32	1	37	51407	109	155	7.00	1900	2900
		51108	40	60	60	13	1	42	51108	33.6	62.8	2.85	3400	5300
		51208	40	68	68	19	1	42	51208	58.7	98.3	4.45	2700	4200
		51308	40	78	78	26	1	42	51308	86.6	135	6.05	2100	3300

Additional Information

Uživatelé, kteří si toto prohlížení prohlíželi, se také zajímali

JTEKT Corporation(Koyo)

Shielded ZZ, ZZX

Shielded ZZ, ZZXJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open, With filling slot

Open, With filling slotJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

Single Direction Type

Single Direction TypeNTN Corporation 17.10.2023

NSK Rolling Bearing

With Flat SeetNSK Rolling Bearing 07.06.2024

JTEKT Corporation(Koyo)

Cylindrical bore

Cylindrical boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

IKO (NIPPON THOMPSON CO.,LTD)

with Inner Ring-Standard (NA, TAFI, TRI, GTRI)

with Inner Ring-Standard (NA, TAFI, TRI, GTRI)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

JTEKT Corporation(Koyo)

With machined cage

With machined cageJTEKT Corporation(Koyo) 16.01.2019

Jtekt North America

Shielded ZZ, ZZX

Shielded ZZ, ZZXJtekt North America 13.12.2018

JTEKT Corporation(Koyo)

Contact Sealed 2RS

Contact Sealed 2RSJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Non-contact sealed 2RU

Non-contact sealed 2RUJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Metric seriesJTEKT Corporation(Koyo) 20.09.2019

Nachi-Fujikoshi

Series 51Nachi-Fujikoshi 07.02.2019

JTEKT Corporation(Koyo)

Shielded ZZJTEKT Corporation(Koyo) 16.01.2019