WJ, WJC - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	ORDER Bearing No. ⁿ/ₐ	FW Inside Diameter [mm]	EW Outside Diameter [mm]	B Bearing Width [mm]	C Basic dynamic load rating [kN]	CO Basic static load rating [kN]	CU Fatigue limit load [kN]	NO Limiting speeds (Oil) [rpm]

		WJC-060806	WJC-060806	9.525	12.700	9.53	3.87	4.00	0.6	37000
		WJC-081008	WJC-081008	12.700	15.875	12.70	6.23	8.01	1.6	35000
		WJC-091108	WJC-091108	14.288	17.463	12.70	6.81	9.25	1.4	34000
		WJC-101208	WJC-101208	15.875	19.050	12.70	7.03	9.96	1.5	27000
		WJ-101410	WJ-101410	15.875	22.225	15.88	15.60	17.80	2.8	29000
		WJ-101414	WJ-101414	15.875	22.225	22.23	21.30	26.40	4.1	29000
		WJ-121616	WJ-121616	19.050	25.400	25.40	26.80	37.20	5.8	24000
		WJ-131714	WJ-131714	20.638	26.988	22.23	25.10	35.00	5.5	22000
		WJ-141816	WJ-141816	22.225	28.575	25.40	29.20	43.50	6.8	20000
		WJ-162112	WJ-162112	25.400	33.338	19.05	28.10	37.10	5.9	18000
		WJ-162116	WJ-162116	25.400	33.338	25.40	36.80	52.50	8.2	18000
		WJ-162120	WJ-162120	25.400	33.338	31.75	44.50	67.20	10.5	18000
		WJ-182416	WJ-182416	28.575	38.100	25.40	42.40	57.80	9.1	16000
		WJ-182420	WJ-182420	28.575	38.100	31.75	52.00	74.70	11.7	16000
		WJ-202612	WJ-202612	31.750	41.275	19.05	33.40	43.70	7.0	14000
		WJ-202616	WJ-202616	31.750	41.275	25.40	44.10	62.30	9.8	14000
		WJ-202620	WJ-202620	31.750	41.275	31.75	53.80	81.00	12.6	14000
		WJ-202624	WJ-202624	31.750	41.275	38.10	63.60	99.60	15.6	14000
		WJ-222816	WJ-222816	34.925	44.450	25.40	45.80	67.20	10.5	13000
		WJ-222820	WJ-222820	34.925	44.450	31.75	56.00	87.20	13.6	13000
		WJ-243016	WJ-243016	38.100	47.625	25.40	47.20	71.60	11.3	12000
		WJ-243020	WJ-243020	38.100	47.625	31.75	57.80	93.00	14.5	12000
		WJ-243024	WJ-243024	38.100	47.625	38.10	68.10	114.80	18.0	12000
		WJ-243028	WJ-243028	38.100	47.625	44.45	77.40	135.70	21.2	12000
		WJ-283412	WJ-283412	44.450	53.975	19.05	39.50	59.60	9.6	9900

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

K, KZWJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Closed One EndJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

NTA, NTC Series

NTA, NTC SeriesJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Seal on each side

Seal on each sideJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Open endsJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

Jtekt North America

WJC,WJ - Inch Series - Radial Needle Roller Cage Assemblies

WJC,WJ - Inch Series - Radial Needle Roller Cage AssembliesJtekt North America 13.12.2018

NTN Corporation

K,K..T2,K..S,KJ..S,KMJ,KMJ..S,K..ZW,KV..S,K..L1

K,K..T2,K..S,KJ..S,KMJ,KMJ..S,K..ZW,KV..S,K..L1NTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

Seal on each side

Seal on each sideJTEKT Corporation(Koyo) 22.12.2017