VGS70... - STANDARD ISO 11901-1 - Bordignon

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13

		LINA Bill of material	MODELLO Model ⁿ/ₐ	CORSAMAX Max. stroke [mm]	LMIN Chamber height [mm]	L Total height [mm]	A Overstroke protection [mm]	D Chamber diameter [mm]	DS Piston rod diameter [mm]	G [mm]	R Gap range [mm]	K [mm]	MA Fastening threads ⁿ/ₐ	BAR / ⁿ/ₐ	IN Initial force [daN]	FIN Final force [daN]	RATIO / ⁿ/ₐ	CICLIMIN Max. cycles per minute [/]	VOLUMEGAS Volumegas [Litri]	PESO Weight [kg]	INFO ⁿ/ₐ

		VGS70-7-18	VGS70-7-18	7.0	49.0	56.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	25.74	1.43	300	0.001	0.04	Internal geometry does no...
		VGS70-10-18	VGS70-10-18	10.0	52.0	62.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	27.00	1.50	300	0.001	0.05	Internal geometry does no...
		VGS70-13-18	VGS70-13-18	12.7	54.7	67.40	1	15.0	7	17	0.8	/	M6 x 6	45	18	27.00	1.50	235	0.002	0.05	Internal geometry does no...
		VGS70-15-18	VGS70-15-18	15.0	57.0	72.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	28.26	1.57	200	0.002	0.05	Internal geometry does no...
		VGS70-19-18	VGS70-19-18	19.0	61.0	80.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	28.26	1.57	160	0.002	0.05	Internal geometry does no...
		VGS70-25-18	VGS70-25-18	25.0	67.0	92.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	29.52	1.64	120	0.003	0.06	Internal geometry does no...
		VGS70-38-18	VGS70-38-18	38.1	80.1	118.20	1	15.0	7	17	0.8	/	M6 x 6	45	18	30.78	1.71	80	0.004	0.07	Internal geometry does no...
		VGS70-50-18	VGS70-50-18	50.0	92.0	142.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	30.78	1.71	60	0.005	0.08	Internal geometry does no...
		VGS70-63-18	VGS70-63-18	63.5	108.5	172.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	30.78	1.71	50	0.007	0.09	Internal geometry does no...
		VGS70-75-18	VGS70-75-18	75.0	120.0	195.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	30.78	1.71	40	0.008	0.10	Internal geometry does no...
		VGS70-80-18	VGS70-80-18	80.0	125.0	205.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	30.78	1.71	40	0.008	0.10	Internal geometry does no...
		VGS70-100-18	VGS70-100-18	100.0	145.0	245.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	32.22	1.79	30	0.010	0.12	Internal geometry does no...
		VGS70-125-18	VGS70-125-18	125.0	170.0	295.00	1	15.0	7	17	0.8	/	M6 x 6	45	18	32.22	1.79	25	0.013	0.14	Internal geometry does no...

Additional Information

Users who viewed this, were also interested in

AGS4200 - STANDARD ISO 11901-3

AGS4200 - STANDARD ISO 11901-3Bordignon 13.03.2023

AGS170 - STANDARD ISO 11901-3

AGS170 - STANDARD ISO 11901-3Bordignon 13.03.2023

VGS90... - STANDARD ISO 11901-1

VGS90... - STANDARD ISO 11901-1Bordignon 01.12.2023

AGS1500 - STANDARD ISO 11901-3

AGS1500 - STANDARD ISO 11901-3Bordignon 13.03.2023

EGS16X1,5-... - NITROGEN GAS EJECTORS

EGS16X1,5-... - NITROGEN GAS EJECTORSBordignon 29.11.2023

VGS200... - STANDARD ISO 11901-1

VGS200... - STANDARD ISO 11901-1Bordignon 01.12.2023

GS.01 - Screw Plugs

GS.01 - Screw PlugsBordignon 09.01.2023

SMLX - SMLX – minimum height, force 3x the standard, with nanotechnologies

SMLX - SMLX – minimum height, force 3x the standard, with nanotechnologiesBordignon 04.01.2023

2441.14.1. - Spring unit for elastomer spring

2441.14.1. - Spring unit for elastomer springFIBRO 21.07.2023

53PSDCB - Standard rubber wheels, pressed steel discs, plain bore

53PSDCB - Standard rubber wheels, pressed steel discs, plain boreTellurerota 06.05.2024

Special Springs

M 200 - Mini cylinders

M 200 - Mini cylindersSpecial Springs 14.11.2023

IGS250 - STANDARD ISO 11901-1

IGS250 - STANDARD ISO 11901-1Bordignon 13.03.2023

AGS1000 - STANDARD ISO 11901-3

AGS1000 - STANDARD ISO 11901-3Bordignon 13.03.2023

Special Springs

M 300 - Mini cylinders

M 300 - Mini cylindersSpecial Springs 14.11.2023