Shafts - Accurate Inc.

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	ORDER Order number ⁿ/ₐ	TOLD Tolerances of the Diameter ⁿ/ₐ	L Length [mm]	TOLL Tolerances of the Length ⁿ/ₐ	MAT Material ⁿ/ₐ	H Hardnes ⁿ/ₐ	SR Surface Roughness ⁿ/ₐ	Q Quantity per a Bag [mm]

		S001 A 3d	S001 A	+0.002~+0.008	2	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S001 B 3d	S001 B	0~-0.01	2	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S002 A 3d	S002 A	+0.002~+0.008	3	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S002 B 3d	S002 B	0~-0.01	3	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S003 A 3d	S003 A	+0.002~+0.008	4	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S003 B 3d	S003 B	0~-0.01	4	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S004 A 3d	S004 A	+0.002~+0.008	5	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S004 B 3d	S004 B	0~-0.01	5	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S005 A 3d	S005 A	+0.002~+0.008	6	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S005 B 3d	S005 B	0~-0.01	6	±0.1	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S006 A 3d	S006 A	+0.002~+0.008	8	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S006 B 3d	S006 B	0~-0.01	8	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S007 A 3d	S007 A	+0.002~+0.008	10	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S007 B 3d	S007 B	0~-0.01	10	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S008 A 3d	S008 A	+0.002~+0.008	12	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S008 B 3d	S008 B	0~-0.01	12	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S130 A 3d	S130 A	+0.002~+0.008	14	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S130 B 3d	S130 B	0~-0.01	14	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S009 A 3d	S009 A	+0.002~+0.008	15	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S009 B 3d	S009 B	0~-0.01	15	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S132 A 3d	S132 A	+0.002~+0.008	16	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S132 B 3d	S132 B	0~-0.01	16	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S079 A 3d	S079 A	+0.002~+0.008	18	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S079 B 3d	S079 B	0~-0.01	18	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30
		S010 A 3d	S010 A	+0.002~+0.008	20	±0.2	SUS 304(JIS G 4303)	Above HV300	Below 1S	30

Additional Information

Users who viewed this, were also interested in

Torsion Springs

Torsion SpringsAccurate Inc. 31.01.2022

A.R.T. Elektromechanik

DIN 6900-1 Z1 D912 steel 8.8 zinc-plated - Hexagon socket SEMS screws with flat washer

DIN 6900-1 Z1 D912 steel 8.8 zinc-plated - Hexagon socket SEMS screws with ...A.R.T. Elektromechanik 26.01.2023

Post for Extension Spring

Post for Extension SpringAccurate Inc. 31.01.2022

A-series (withaut a bracket)

A-series (withaut a bracket)Accurate Inc. 31.01.2022

SuretorqueAccurate Inc. 31.01.2022

Coned Disk Screw

Coned Disk ScrewAccurate Inc. 31.01.2022

B-series (with a bracket)

B-series (with a bracket)Accurate Inc. 31.01.2022

SD M8x1 -2 - Shock absorber

SD M8x1 -2 - Shock absorberAfag 13.12.2021

Tangless Inserts

Tangless InsertsAccurate Inc. 31.01.2022

Battery Springs

Battery SpringsAccurate Inc. 31.01.2022

Unique SSV Aseptic Shut-off DN-40 - Seat Valves

Unique SSV Aseptic Shut-off DN-40 - Seat ValvesAlfa Laval 27.09.2023

CCTY BEARING JAPAN CORPORATION

BRHV - SeriesCCTY BEARING JAPAN CORPORATION 10.01.2019

C StandardAccurate Inc. 31.01.2022

DE Standard (DE500-DE899)

DE Standard (DE500-DE899)Accurate Inc. 31.01.2022