Open ends - JTEKT Corporation(Koyo)

??

Výběr CAD modelu

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Kusovník	ORDER Bearing No. ⁿ/ₐ	FW Inside Diameter [mm]	D Outside Diameter [mm]	C Bearing Width [mm]	R Radius [mm]	CR Basic dynamic load rating [kN]	C0 Basic static load rating [kN]	CU Fatigue limit load [kN]	NO Limiting speeds (Oil) [mm]

		NK5/10TN	NK5/10TN	5	10	10	0.2	2.18	1.71	0.26	47000
		NK5/12TN	NK5/12TN	5	10	12	0.2	3.04	2.63	0.40	47000
		NK6/10	NK6/10	6	12	10	0.2	3.19	2.90	0.42	44000
		NK6/12TN	NK6/12TN	6	12	12	0.2	3.07	2.74	0.42	44000
		NK7/10TN	NK7/10TN	7	14	10	0.3	2.74	2.44	0.37	42000
		NK7/12TN	NK7/12TN	7	14	12	0.3	3.40	3.22	0.49	42000
		NK8/12	NK8/12	8	15	12	0.3	4.57	4.89	0.74	41000
		NK8/12ASR1	NK8/12ASR1	8	15	12	0.3	4.57	4.89	0.74	41000
		NK8/16	NK8/16	8	15	16	0.3	5.22	5.78	0.88	41000
		NK9/12	NK9/12	9	16	12	0.3	4.27	4.60	0.70	40000
		NK9/16	NK9/16	9	16	16	0.3	5.57	6.47	0.98	40000
		NK10/12	NK10/12	10	17	12	0.3	5.40	6.43	0.98	39000
		NK10/16TN	NK10/16TN	10	17	16	0.3	5.30	6.27	0.94	39000
		NK12/12A	NK12/12A	12	19	12	0.3	6.86	7.60	1.15	30000
		NK12/16	NK12/16	12	19	16	0.3	6.78	9.03	1.40	37000
		RNA4900	RNA4900	14	22	13	0.3	9.39	10.30	1.55	24000
		NK14/16A	NK14/16A	14	22	16	0.3	12.40	14.80	2.25	24000
		NK14/20A	NK14/20A	14	22	20	0.3	14.70	18.40	2.90	24000
		NK15/16A	NK15/16A	15	23	16	0.3	12.40	15.00	2.30	24000
		NK15/20A	NK15/20A	15	23	20	0.3	14.70	18.60	2.95	24000
		RNA4901	RNA4901	16	24	13	0.3	10.50	12.30	1.85	28000
		NK16/16A	NK16/16A	16	24	16	0.3	13.00	16.20	2.50	28000
		NK16/20A	NK16/20A	16	24	20	0.3	15.40	20.20	3.20	28000
		RNA6901	RNA6901	16	24	22	0.3	16.10	21.30	3.30	28000
		NK17/16A	NK17/16A	17	25	16	0.3	13.60	17.50	2.70	27000

Additional Information

Uživatelé, kteří si toto prohlížení prohlíželi, se také zajímali

JTEKT Corporation(Koyo)

Open endsJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Seal on one side

Seal on one sideJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Seal on each side

Seal on each sideJTEKT Corporation(Koyo) 22.12.2017

NTN Corporation

Non-contact sealed type LLB,LLF

Non-contact sealed type LLB,LLFNTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

With machined cage

With machined cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

K, KZWJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

BN1_002 - Needle roller bearings with machined rings, without an inner ring

BN1_002 - Needle roller bearings with machined rings, without an inner ringSKF 12.04.2024

JTEKT Corporation(Koyo)

Closed One EndJTEKT Corporation(Koyo) 22.12.2017

BN1_006 - Needle roller bearing inner rings

BN1_006 - Needle roller bearing inner ringsSKF 06.06.2024

NTN Corporation

RNA48,RNA49,RNA59,RNA69,NK (No Inner Ring)

RNA48,RNA49,RNA59,RNA69,NK (No Inner Ring)NTN Corporation 17.10.2023

NTN Corporation

NA48,NA49,NA59,NA69,NK+IR (With Inner Ring)

NA48,NA49,NA59,NA69,NK+IR (With Inner Ring)NTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

811, 812, 893 (Bearings)

811, 812, 893 (Bearings)NTN Corporation 17.10.2023