JEM - Metric sizes, Low moisture absorption – iglidur® J; low friction values - igus

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

		JEM-04-05	JEM-04-05	4	6.25	8.3	5
		JEM-05-06	JEM-05-06	5	8.00	10.2	6
		JEM-06-06	JEM-06-06	6	8.00	10.2	6
		JEM-08-08	JEM-08-08	8	10.00	13.3	8
		JEM-10-09	JEM-10-09	10	13.00	16.1	9
		JEM-12-10	JEM-12-10	12	15.00	18.1	10
		JEM-15-12	JEM-15-12	15	18.00	22.0	12
		JEM-16-13	JEM-16-13	16	19.50	24.1	13
		JEM-17-14	JEM-17-14	17	20.00	25.2	14
		JEM-17-17	JEM-17-17	17	43.82	47.0	17
		JEM-20-16	JEM-20-16	20	24.00	29.1	16
		JEM-20-17	JEM-20-17	20	43.82	47.0	17
		JEM-25-17	JEM-25-17	25	49.14	52.0	17
		JEM-25-20	JEM-25-20	25	29.00	35.6	20
		JEM-30-19	JEM-30-19	30	59.02	62.0	19
		JEM-30-22	JEM-30-22	30	34.00	40.9	22
		JEM-35-20	JEM-35-20	35	69.17	72.0	20
		JEM-40-21	JEM-40-21	40	77.19	80.0	21
		JEM-45-22	JEM-45-22	45	82.10	85.0	22
		JEM-50-24	JEM-50-24	50	86.74	90.0	24

Additional Information

Users who viewed this, were also interested in

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistance

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

ESTM - Metric sizes

ESTM - Metric sizesigus 19.01.2021

RJUM-05 - Pillow Block, mm

RJUM-05 - Pillow Block, mmigus 12.09.2022

WGRM - Ball/Socket Joint, Metric sizes, right-hand thread

WGRM - Ball/Socket Joint, Metric sizes, right-hand threadigus 19.01.2021

RJUM-03 - Linear Plain Bearing, mm

RJUM-03 - Linear Plain Bearing, mmigus 20.07.2021

GELMF - Metric sizes, left-hand thread, with Spring-Loaded-Pins

GELMF - Metric sizes, left-hand thread, with Spring-Loaded-Pinsigus 19.01.2021

OJUI-01 - Liner Plain Bearing, inch

OJUI-01 - Liner Plain Bearing, inchigus 19.01.2021

TJUM-05 - Split Pillow Block, mm

TJUM-05 - Split Pillow Block, mmigus 12.09.2022

OJUM-06-LL - Floating Pillow Block, mm

OJUM-06-LL - Floating Pillow Block, mmigus 12.09.2022

RJM-01 - Solid Plastic Bearing, mm

RJM-01 - Solid Plastic Bearing, mmigus 20.07.2021

EGFM T - Metric sizes, Tolerance

EGFM T - Metric sizes, Toleranceigus 19.01.2021

RQA - Quad Block, closed, mm

RQA - Quad Block, closed, mmigus 12.09.2022

GERMKE - Metric sizes, right-hand thread, with clevis pin and circlips, used in combination with series E rod end bearings

GERMKE - Metric sizes, right-hand thread, with clevis pin and circlips, use...igus 19.01.2021

KBRI - Inch sizes, right-hand thread

KBRI - Inch sizes, right-hand threadigus 19.01.2021