Design 119 - Pivot Eye Attachment - Heiss

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10

		LINA Bill of material	TYP Type designation ⁿ/ₐ	BD Line pressure [bar]	BF Design ⁿ/ₐ	KOLBEN Piston diameter Ø [mm]	D Rod diameter Ø [mm]	E Height [mm]	D1 Diameter [mm]	D2 Diameter [mm]	D8 Diameter D8 H8 [mm]	L003 Length [mm]	L004 Length [mm]	L005006 Length [mm]	L2 Length [mm]	L3 Length [mm]	L4 Length [mm]	L13 Length [mm]	L14 Length [mm]	B8 Width [mm]	B9 Width [mm]	R Radius [mm]	G Thread ⁿ/ₐ	X Length [mm]	ALFA1 Angle [°]	ALFA Length x angle [mm x °]

		HEISS SZ 160-25/12/9.1-11...	SZ 160-25/12	160	119	25.000	12.000	83.000	39.000	30.000	10.000	101.000	141.000	121.000	16.000	52.000	26.000	20.000	30.000	6.000	9.000	19.500	G1/8"	58.000	12°	1,5x30°
		HEISS SZ 160-32/16/5.1-11...	SZ 160-32/16	160	119	32.000	16.000	85.000	48.000	38.000	15.000	117.000	157.000	137.000	20.000	54.000	28.000	25.000	40.000	9.000	12.000	20.000	G1/4"	68.000	8°	2x30°
		HEISS SZ 160-40/20/5.1-11...	SZ 160-40/20	160	119	40.000	20.000	87.000	58.000	48.000	17.000	137.000	177.000	157.000	25.000	62.000	35.000	32.000	52.000	10.000	14.000	25.000	G1/4"	80.000	10°	2x30°
		HEISS SZ 160-50/25/4.1-11...	SZ 160-50/25	160	119	50.000	25.000	90.000	72.000	60.000	20.000	153.000	203.000	178.000	30.000	70.000	40.000	38.000	52.000	12.000	16.000	28.000	G3/8"	87.000	9°	2,5x30°
		HEISS SZ 160-63/32/6.1-11...	SZ 160-63/32	160	119	63.000	32.000	93.000	90.000	75.000	25.000	166.000	206.000	186.000	40.000	82.000	48.000	40.000	56.000	16.000	20.000	35.000	G3/8"	90.000	7°	3x30°
		HEISS SZ 160-80/40/17.1-1...	SZ 160-80/40	160	119	80.000	40.000	97.000	110.000	92.000	40.000	194.000	234.000	214.000	35.000	96.000	55.000	50.000	70.000	22.000	28.000	50.000	G1/2"	115.000	7°	3x30°
		HEISS SZ 160-100/50/23.1-...	SZ 160-100/50	160	119	100.000	50.000	103.000	135.000	115.000	50.000	243.000	293.000	268.000	45.000	127.000	75.000	65.000	85.000	28.000	35.000	60.000	G1/2"	137.000	6°	3x30°
		HEISS SZ 160-125/60/28.1-...	SZ 160-125/60	160	119	125.000	60.000	130.000	170.000	145.000	60.000	305.000	375.000	340.000	58.000	155.000	95.000	90.000	116.000	36.000	44.000	70.000	G3/4"	178.000	6°	4x30°
		HEISS SZ 160-160/80/20.1-...	SZ 160-160/80	160	119	160.000	80.000	140.000	220.000	190.000	70.000	415.000	515.000	465.000	65.000	220.000	145.000	115.000	140.000	40.000	49.000	82.000	G1"	215.000	6°	5x30°
		HEISS SZ 160-200/100/20.1...	SZ 160-200/100	160	119	200.000	100.000	150.000	270.000	245.000	80.000	550.000	670.000	610.000	80.000	240.000	145.000	141.000	235.000	45.000	55.000	90.000	G1"	261.000	6°	6x30°

Additional Information

Users who viewed this, were also interested in

Design 125 - Clevis Attachment

Design 125 - Clevis AttachmentHeiss 15.09.2017

Design 113-2 - Foot Attachment

Design 113-2 - Foot AttachmentHeiss 15.09.2017

Design CG1 - threaded blind holes on rod side - O-ring ports

Design CG1 - threaded blind holes on rod side - O-ring portsHeiss 15.09.2017

Nitrogen Springs

SA - Compesation tanks

SA - Compesation tanksNitrogen Springs 28.02.2023

Nitrogen Springs

SRA - Tank for air system

SRA - Tank for air systemNitrogen Springs 28.02.2023

Nitrogen Springs

TS-300 - Safety plug with CE rupture disc

TS-300 - Safety plug with CE rupture discNitrogen Springs 28.02.2023

Nitrogen Springs

KF 10 - Minimum height, maximum force, hose cylinders with G1/8 charging port

KF 10 - Minimum height, maximum force, hose cylinders with G1/8 charging po...Nitrogen Springs 28.02.2023

Nitrogen Springs

FA - FixingNitrogen Springs 28.02.2023

Nitrogen Springs

KF 7,5 - Minimum height, maximum force, hose cylinders with G1/8 charging port

KF 7,5 - Minimum height, maximum force, hose cylinders with G1/8 charging p...Nitrogen Springs 28.02.2023

Nitrogen Springs

F01-F02-FOS - Fixing

F01-F02-FOS - FixingNitrogen Springs 28.02.2023

Design 117 - Flange Attachment

Design 117 - Flange AttachmentHeiss 15.09.2017

Design 116 - Pivot Pin Attachment

Design 116 - Pivot Pin AttachmentHeiss 15.09.2017

Design 218 - Pivot Eye Attachment

Design 218 - Pivot Eye AttachmentHeiss 15.09.2017

Design 112-1 - Flange Attachment

Design 112-1 - Flange AttachmentHeiss 15.09.2017